Products » Corrosion Monitoring » True Test Tool

• 
  True Test Tool

  The True Test Tool is a downhole corrosion monitoring tool that catches corrosion problems before failure or damage occurs. Previously, corrosion monitoring was routinely accomplished by placing weight loss coupons in the system on or near the well head. The information compiled from this location is not representative of subsurface corrosion conditions effecting downhole tubular and pumps. Now, with the True Test Tool, corrosion rates downhole can be established during routine pulling of your well, enhancing the results of your corrosion treatment programs.

  Use of the True Test Tool will help improve your corrosion monitoring and increase profits by:

  • Identifying severity of corrosion on problem wells
  • Reducing frequent pulling cost caused by corrosion
  • Identifying current corrosion versus previous corrosion
  • Maximizing chemical effectiveness
  • Identifying corrosion versus abrasion
  • Optimizing downhole equipment replacement cost

  In addition to these advantages, the True Test Tool delivers exact downhole corrosion information needed to substantially increase service life.

  Standard models are recommended to be used in the rod string (mid string and just above the pump). Caution should be used not to exceed load limits. For applications exceeding these limits, please consult us on our Contact Us page.

  Optimize your downhole equipment cost by identifying your corrosion treating needs with the True Test Tool for downhole corrosion monitoring.

  ---

  Request a Quote

  Here you can request to purchase the True Test Tool.

  Select Barrel Size*

  Select Barrel Size* 7/8" Pin - Male Thread

  Select Quantity*

  Select Quantity* 1 2 3 4 5

  Review and submit your request/s by selecting the barrel icon above.